631565
16
Zoom out
Zoom in
Previous page
1/30
Next page
Cradle Side-Table Assembly
Getting Started
16
Place the first bracket
on the cradle by
unscrewing the four nuts
located at the metal ring
with the 4 legs of the
cradle. Note that the top of
the brackets will have to
point outward to the sides.
Put each metal support
bracket on the outside of
the leg placing the upper
hole of the bracket through
the screw while replacing
the nut in position. Don’t
tighten yet and don’t place
the bottom screw;
adjustment may be
required.
Place one (D) long screw from the outside of the bracket through the sliding
hole of the shelve hinge. The screw must be placed in from the outer part of
the bracket. Make sure that you insert the long screw into the copper ring
spacer before inserting into shelve hinge. Repeat the same on the other
bracket hole. Secure the screws with a nut and black washer (in between
shelve and bracket) on the top screw and a nut on the bottom screw.
The last step is to secure the
brackets with the large short
screw and the nut
accompanying it.
Hardware
A) 4 Short Screws
B) 4 Black Washers
C) 4 Large Nuts
D) 8 Long Screws
E) 8 Small Nuts
Other
(8) Copper Ring Spacers
(4) Black Brackets
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Primogrill OVAL JR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Primogrill OVAL JR in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info