467494
18
Zoom out
Zoom in
Previous page
1/22
Next page
WB1 www.primo-elektro.be
18
- Ihr Gerät ist auch mit einem Frostschutzstand ausgestattet. Stecken Sie den Stecker
in die Steckdose und drehen Sie den Schaltknopf auf das Frostschutzsymbol. Ihr
Gerät schaltet sich nun automatisch ein, wenn die Raumtemperatur 5°C unterschreitet.
- Ihr Gerät hat auch einen normalen Ventilator. Sie können das Gerät also im Sommer
als Kaltluftventilator verwenden. Für diese Funktion drehen Sie den Schaltknopf auf
das Ventilatorsymbol.
Bemerkung: bevor Sie das Gerät ausschalten, empfehlen wir Ihnen es 2 bis 3 Minuten
auf Ventilation in Betrieb zu nehmen damit es erkaltet.
SICHERHEITSSYSTEME
Der Heizlüfter ist mit einem Überhitzungsschutz ausgestattet, der die Heitzung des
Geräts abschaltet im Fall der Überhitzung, zum Beispiel wegen eine Abdeckung der
Gitter. Der Ventilor bleibt funktionieren um die Heitzluft schneller zu entfernen.
Falls dies vorkommt, bitte das Gerät ausschalten, den Stecker ca. 10 Minuten aus der
Steckdose lassen, und die Gitter freimachen. Schalten Sie das Gerät danach wie oben
beschrieben wieder an. Dies reicht, um den Überhitzungsschutz auszuschalten. Falls
das Problem anhält, wenden Sie sich bitte an den nächsten Kundendienst.
Ihr Gerät ist mit einen Kippschalter ausgestattet, der sich unter der Basis des Gerätes
befindet und das Gerät automatisch abschaltet, wenn es umkippt oder aufgehoben
wird. Aus diesem Grund ist es unbedingt notwendig, dass Sie das Gerät auf eine
flache Ebene hinstellen. Dieser Schalter wird automatisch eingedruckt, wenn das
Gerät auf eine flache Ebene hingestellt wird.
REINIGUNG UND PFLEGE
Vor jeder Reinigung den Netzstecker ziehen und das Gerät abkühlen lassen.
Aus Sicherheitsgründen um elektrische Schläge vorzubeugen darf das Gerät nicht mit
Flüssigkeiten behandelt werden. Reinigen Sie das Gehäuse mit einem feuchten Tuch.
Die Luftaustrittsöffnungen können bei Verschmutzung mit einem Staubsauger
abgesaugt werden. Eine regelmäßige Reinigung ist notwendig für das Gut-
Funktionieren des Gerätes.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Primo WB1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Primo WB1 in the language / languages: German, Dutch, French, Portuguese as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info