796686

Primo PR132DV Manual

53
Zoom out
Zoom in
Previous page
1/60
Next page
53
WWW.PRIMO-ELEKTRO.BE
MOVE THE DEVICE
• If the unit is turned off for any reason, wait 10 minutes before turning it on
again. The pressure in the cooling system should be stabilized before turning
the unit on again.
• Turn off the appliance and unplug it. Remove all food products. Also remove or
secure all mobile parts (drawers, etc.) in the freezer to prevent shock.
• Move the appliance and install. If the appliance was held on its side while
being moved, even if very briefly, leave the appliance in the upright position
for at least 10 minutes before turning it on.
• Your appliance uses isobutane (R600a) as a refrigerant. Notwithstanding that
R600a is an environmentally friendly and natural gas, it is explosive. Therefore,
be very careful while moving or installing your device to avoid damage to the
cooling elements. In case of a leak caused by damage to the cooling elements,
move your freezer away from open flames or heat sources and air the room
the appliance is in for a few minutes.
FREQUENTLY ASKED QUESTIONS
Problem Solution
Device is not work-
ing.
• The unit is not receiving power, check that the power
supply is OK.
• Check that the plug is plugged in.
• Check that the correct voltage is used.
The device jumps up
too often.
• Check that the door is closed properly and that the
drawers are fully retracted
• Do not place hot food in the appliance; let it cool to
room temperature rst
• The door has been open too often or too long.
• The appliance is getting the wrong voltage.
• The appliance is too close to a heat source or direct
sunlight.
The inside tempera-
ture of the appliance
is too hot.
• Check that the unit has power.
• Check that the plug is plugged in.
• The door has been left open too long or too often.
• The air supply is blocked.
• Check that the appliance is getting the correct volt-
age.
• The appliance is too close to a heat source or the sun.
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Primo PR132DV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Primo PR132DV in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info