796835
49
Zoom out
Zoom in
Previous page
1/56
Next page
49
WWW.PRIMO-ELEKTRO.BEPR149DV / PR150DV
refrigerant gas. If the pipes are accidentally perforated, the appliance will stop
working and the warranty will also be void.
When the appliance will not be used for an extended period of time, unplug the
appliance. Leave the door partially open, this will prevent the formation of mold
and foul odors.
7. MOVE THE DEVICE
If the unit is turned off for any reason, wait 10 minutes before turning it on
again. The pressure in the cooling system should be stabilized before turning
the unit on again.
Turn off the appliance and unplug it. Remove all food products. Also remove or
secure all mobile parts (drawers, etc.) in the freezer to prevent shock.
Move the appliance and install. If the appliance was held on its side while
being moved, even if very briefly, leave the appliance in the upright position
for at least 10 minutes before turning it on.
Your appliance uses isobutane (R600a) as a refrigerant. Notwithstanding that
R600a is an environmentally friendly and natural gas, it is explosive. Therefore,
be very careful while moving or installing your device to avoid damage to the
cooling elements. In case of a leak caused by damage to the cooling elements,
move your freezer away from open flames or heat sources and air the room
the appliance is in for a few minutes.
8. TIPS
Do not freeze food back when it has already been defrosted.
Do not put beverages with bubbles in the freezer.
Be careful when consuming popsicles just out of the freezer to avoid freezer
burns.
Do not take anything out of the freezer with wet hands.
The freezer makes noise when the compressor pumps the refrigerant around.
This is normal.
Do not put hot foods in the freezer.
Make sure the food is covered.
Do not compress the food too much; air should still be able to circulate around
it.
Do not leave the door open too long. Also make sure that the door is always
closed properly again.
Label the food with the date to check the shelf life in the freezer.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Primo PR125DV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Primo PR125DV in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info