722013
26
Zoom out
Zoom in
Previous page
1/108
Next page
26 MV600
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to several di erent heights. See
gure 20.
1. Remove the seat and/or shroud from your vehicle.
2. Remove the seat height adjustment bolt.
3. Raise or lower the upper seat post to the desired seat
height.
4. While holding the upper seat post at that height, match
up the locating holes in the upper seat post with those of
the lower seat post.
5. Insert the seat height adjustment bolt through the locating
holes of both the upper and lower seat posts.
6. Reinstall the nut onto the seat height adjustment bolt and
tighten.
7. Reinstall the rear shroud and the seat.
POSITIONING BELT (OPTIONAL)
Your vehicle seat may be equipped with an auto-type
positioning belt that can be adjusted for operator comfort.
The positioning belt is designed to help support the operator
so that he or she does not slide down or forward in the seat.
The positioning belt is not designed for use as a restraining
device.
Figure 20. Seat Height Adjustment
1. UPPER SEAT POST
2. NUT
3. SEAT HEIGHT ADJUSTMENT BOLT
4. LOWER SEAT POST
IDENTIFICATION KEY
1
23
4
V. COMFORT ADJUSTMENTS
WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is
your vehicle suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should be
properly belted into seats approved by the vehicle manufacturer.
WARNING! The positioning belt should be secured at all times. Never allow the positioning belt
to hang or drag on the oor as it may become entangled.
To install the positioning belt (if required):
1. Remove the seat from your vehicle.
2. Place the seat upside down so that you can see the bottom of the seat base. See gure 21.
3. Use a wrench to remove the two rear bolts that attach the seat frame to the seat base.
4. Insert the bolt through the appropriate ends of the positioning belt and then reinstall the bolts and belt back
into the seat bottom.
5. Tighten the bolts.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Wrangler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Wrangler in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info