722013
13
Zoom out
Zoom in
Previous page
1/108
Next page
MV600 13
Manual Freewheel Lever
Whenever you need or want to push your vehicle for short
distances, you can put it in freewheel mode.
1. Remove the key from the key switch.
2. Push forward on the manual freewheel lever to
disable the drive system and the brake system. This
will enable you to push the vehicle.
NOTE: If your vehicle is equipped with a 2-position
manual freewheel lever, you must pull up on the lever
and then push forward on the manual freewheel lever to
disable the drive system and the brake system. This will
enable you to push the vehicle.
3. Pull back on the manual freewheel lever to reengage
the drive and the brake systems and take your vehicle
out of freewheel mode.
IDENTIFICATION KEY
1. MANUAL FREEWHEEL LEVER
2. MOTOR/TRANSAXLE ASSEMBLY
Figure 7. Rear Components
II. YOUR VEHICLE
2
1
WARNING! When your vehicle is in freewheel mode, the braking system is disengaged.
Disengage the drive motors only on a level surface.
Ensure the key is removed from the key switch.
Stand to the side of the vehicle to engage or disengage freewheel mode. Never sit on a
vehicle to do this.
After you have nished pushing your vehicle, always return it to the drive mode to lock the
brakes.
NOTE: If the vehicle is placed in freewheel mode (manual freewheel lever forward) while the key is in the “on”
position, the vehicle will not run until the manual freewheel lever is pushed rearward and the key is turned to
the “o ” position, then back to the “on” position.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your vehicle’s
batteries into the controlled mechanical energy that drives the vehicle’s wheels.
Batteries
The batteries store electrical energy that powers your vehicle. See III. “Batteries and Charging ” for information
on how to charge your vehicle batteries.
Back-Up Sensor
Your vehicle is equipped with an automatic backup sensor and reverse light to alert you of objects that may be
behind you. When the vehicle is driven in the reverse direction and a solid obstacle such as a wall is detected, an
audible tone is emitted alerting you to the presence of a detected object. This feature can be turned o using the
switch located on the backup sensor module on the rear of your vehicle.
WARNING! The back up sensor should not take the place of looking behind you prior to and while
driving in a reverse direction. The sensors may not detect objects that are moving, or ones with
poor re ective properties such as persons, pets or shrubbery.
To ensure reliable operation, keep the sensor free of dirt, mud, and water.
If exposed to water, allow sensor to dry before using.
If sensor screens become covered with dust, debris, or water, wipe with a dry cloth prior to use.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Wrangler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Wrangler in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info