668227
32
Zoom out
Zoom in
Previous page
1/248
Next page
32
Full-size Scooter Series
1. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
2 Gently pull the battery shroud forward, then lift up and off of the scooter.
3. Disconnect the battery tie-down strap.
4. Disconnect the front-to-rear harness.
5. Unplug both battery harnesses by depressing the tabs and then pulling each harness straight up. See
figure 14.
6. Remove the batteries from the battery wells.
NOTE: If spacers are installed to secure the batteries, remove the spacers for safe keeping until the
scooter is reassembled. See figure 16.
WARNING! Failure to unplug both battery harnesses and the front-to-rear harness prior
to separating the front and rear sections could result in permanent damage to the
scooter.
Frame Separation
1. Arrange the front wheel(s) in a straight forward-facing position.
2. Lower the tiller.
NOTE: The pivoting tiller is equipped with a mechanism that will lock the front wheels in place when
the tiller is completely lowered and secured.
1 2
4 5 6
3
VI. DISASSEMBLY AND ASSEMBLY
NOTE: Please check the Scooter Features Table on the inside of the front cover to determine if your
scooter model can be disassembled for transporting or storage purposes.
DISASSEMBLY
You can disassemble the scooter into several pieces: the seat, the rear section, the front section, the
batteries, the basket, and the battery shroud. See figure 22. No tools are required to disassemble or
assemble your scooter, but keep in mind that the disassembled sections of the scooter take up more floor
space than the assembled unit. Always disassemble or assemble your scooter on a level, dry surface with
sufficient room for you to work and move around your scooter—about 5 feet (1.5 meters) in all directions.
Remember that some scooter components are heavy and you may need assistance when lifting them.
WARNING! Do not lift beyond your physical capability. Ask for assistance when
necessary while disassembling or assembling your scooter.
Figure 22. Disassembled scooter
IDENTIFICATION KEY
1. SEAT
2. REAR SECTION
3. FRONT SECTION
4. BASKET
5. BATTERIES
6. BATTERY SHROUD
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride VICTORY XL-130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride VICTORY XL-130 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride VICTORY XL-130

Pride VICTORY XL-130 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info