668228
21
Zoom out
Zoom in
Previous page
1/128
Next page
Mid-size Scooter Series 21
III. BATTERIES AND CHARGING
WARNING! Do not mix old and new batteries. Always replace both batteries at the same time.
WARNING! Contact your authorized Provider if you have any questions regarding the batteries
in your scooter.
WARNING! Do not replace the batteries while the scooter is occupied.
WARNING! The batteries on your scooter should only be serviced or replaced by an authorized
Provider or a quali ed technician.
PROHIBITED! Keep tools and other metal objects away from battery terminals. Contact with
tools can cause electrical shock.
You may need the following to change your batteries:
Metric/standard socket set and ratchet
Adjustable wrench
Screwdriver
WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary while
disassembling or assembling your scooter.
WARNING! Do not pull on electrical harness wires directly to detach them from the scooter.
Always grasp the connector itself when disconnecting the harness to prevent wire damage.
NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag. Contact your
local waste disposal agency or your authorized Provider for instructions on disposal and battery recycling,
which is our recommended course of action.
To change batteries in your scooter:
1. Remove the seat and battery shroud. See gure 13.
2. Disconnect the battery tie-down strap. See gure 14.
3. Disconnect the battery harnesses by depressing the
tabs on the battery harness connectors and pulling
them straight up. See gure 14.
4. Disconnect the battery cables from the battery terminals
by sliding back the terminal boots and unscrewing the
nut from the bolt. See gures 15 and 16.
5. Remove the old batteries from the battery wells.
6. Place a new battery in each battery well. For 710LX
and 710LXW models, face the battery terminals of
each battery rearward. For all other models, face the
battery terminals of each battery opposite each other
and toward the outer sides of the scooter. See gure 14.
7. Connect the red battery cable to the positive (+)
battery terminal on each battery.
8. Connect the black battery cable to the negative (-)
battery terminal on each battery.
9. Reposition the terminal boots over the battery
terminals.
10. Reconnect the battery harnesses.
11. Reconnect the battery tie-down strap.
12. Reinstall the battery shroud and seat.
2
1
1
Figure 13. Battery Shroud Removal/Installation
* Models 93 and 104
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Victory 10DX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Victory 10DX in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Victory 10DX

Pride Victory 10DX User Manual - English - 48 pages

Pride Victory 10DX User Manual - German, Dutch, Italian - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info