721992
27
Zoom out
Zoom in
Previous page
1/32
Next page
Raptor 27
VIII. CARE AND MAINTENANCE
ABS PLASTIC SHROUDS
If your scooter has a body shroud with a glossy finish, the body shroud has been sprayed with a
clear sealant coating. You can apply a light coat of car wax to help it retain its high-gloss appearance.
If your scooter has a body shroud with a matte finish, use ONLY products developed for matte-
finish paint. Do not use wax, detail spray, ArmorAll®, or any product made for glossy paint.
WARNING! Carefully choose the correct product to protect the finish of your scooter’s shroud(s).
ONLY products developed for matte-finish paint should be used on shrouds with a matte finish.
Failure to follow this warning may result in damage to the shroud’s matte paint finish.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected
periodically for wear by your authorized Pride Provider.
CONSOLE, CHARGER, AND REAR ELECTRONICS
Keep these areas free of moisture.
Allow these areas to dry thoroughly if they have been exposed to moisture before operating your
scooter again.
BRAKE PADS
The brake pads on your scooter should be inspected periodically for wear. Once the pads reach 1/16-th
of an inch or 2 mm in thickness, they should be replaced. If any of the brake pads needs to be replaced,
then it is best to replace all the brake pads at the same time. Contact your authorized Pride Provider for
more information on replacing the brake pads.
FUSE REPLACEMENT
In the event a fuse should cease to work:
1. Remove the fuse by pulling it out of its slot.
2. Examine the fuse to be sure it is blown.
See figure 16.
3. Insert a new fuse of the same rating.
WARNING! The replacement fuse
must exactly match the rating of
the fuse being replaced. Failure
to use properly rated fuses may
cause damage to the electrical
system.
NYLON LOCK NUT REPLACEMENT
Any nylon insert lock nut removed during
the periodic maintenance, assembly, or
disassembly of the scooter must be replaced
with a new nut. Nylon insert lock nuts should
not be reused as it may cause damage to
the nylon insert, resulting in a less secure
fit. Replacement nylon insert lock nuts are
available at local hardware stores or through
your authorized Pride Provider.
Figure 16. Fuse Replacement
1
2
IDENTIFICATION KEY
1. Working Fuse
2. Blown Fuse (Replace)
27


Need help? Post your question in this forum.

Forumrules
1

Forum

pride-raptor-series

Reset search

  • I have a a pride raptor scooter how can I change speedo from mph to kilometers
    Submitted on 27-4-2022 at 00:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Raptor Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Raptor Series in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info