514563
30
Zoom out
Zoom in
Previous page
1/34
Next page
30
Rally
Always disassemble or assemble your scooter on a level, dry surface with sufficient room for you to work
and move around your scooter. Keep in mind that the disassembled sections of the scooter take up more
floor space than the assembled scooter.
VIII. DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
1. Remove the key from the key switch. See IV. Your Rally.
2. Pull up on the manual freewheel lever. See IV. Your Rally. Putting your Rally in freewheel mode
makes it easier for you to maneuver the rear section because the drive wheels are free to turn.
3. Lift the seat up and off of your scooter.
4. Gently lift the rear shroud off of your scooter. The rear shroud is held in place with a reusable fastener.
5. Unplug both battery harness connectors. See figure 15.
6. Remove the battery straps and lift both batteries from the battery wells.
7. Unplug the large, white, 9-pin front-to-rear connector that connects the front control console assembly
harness to the electronic controller assembly harness. See figure 15.
CAUTION! Failing to unplug both battery harness connectors and the front-to-rear connector prior
to further disassembly could result in permanent damage to your scooter.
WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for
assistance when necessary while disassembling your scooter.
FIGURE 16. FRONT-TO-REAR LOCKING LEVER
Separating The Front And Rear Sections
1. Lower the scooters tiller to the centre of the floorboard by turning the tiller adjustment lever anticlockwise
until it is loose. Press the tiller release buttons and lower the tiller to the centre of the floorboard.
Tighten the tiller adjustment lever.
2. Pull up on the front-to-rear locking lever (releases the locking pin) with one hand, and push on the seat
pedestal to pivot the scooters rear section rearward with your other handfar enough so the rear
sections upper pegs come free of the front sections upper slots. See figures 16 and 17.
3. With one hand on the seat pedestal and one hand on the frame handle, slightly lift the front section and
slide the front and rear sections apart. See figures 17 and 18.
FRONT-TO-REAR CONNECTOR
FIGURE 15. BATTERY HARNESS CONNECTORS/
FRONT-TO-REAR CONNECTOR
BATTERY HARNESS CONNECTORS
FRONT-TO-REAR LOCKING LEVER
LOCKING PIN
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Rally 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Rally 4 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Rally 4

Pride Rally 4 User Manual - German - 26 pages

Pride Rally 4 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info