668244
29
Zoom out
Zoom in
Previous page
1/36
Next page
Q6 Edge www.pridemobility.com 29
VII. CARE AND MAINTENANCE
To replace the batteries:
1. Turn off the power to the controller.
2. Make sure that the power chair is in drive mode. See III. “Your Power Chair.”
3. Remove the detent pin from the top of the actuator. See figure 7.
4. Pivot the seat toward the rear of the power chair and support the seat in this position. Take care to ensure that
the recline actuator does not damage the rear door of the power chair while the seat is pivoted rearward.
5. Remove the front cover by squeezing the release handles (see figure 23) and lifting the front cover up and
away from the power base.
6. Remove the top cover by lifting it straight up and off of the power chair.
7. Disconnect the actuator harness.
8. Disconnect the quick release battery connectors. See figure 3.
9. Remove the front battery from the power base by sliding it forward and out of the power base.
10. Remove the rear battery by lifting it up and out of the power base.
11. Disconnect the battery harness from each battery.
12. Connect the battery harness to the new front battery according to the battery wiring diagram. See figure 23.
WARNING! Make sure you tighten the fasteners so that the connections are secure.
13. Connect the battery harness to the new rear battery according to the battery wiring diagram. See figure 23.
14. Install the new rear battery by lowering it into the power base. Ensure the actuator is straight up and down next
to the rear battery. Connect the quick release battery connectors to the new rear battery.
15. Install the new front battery by sliding it into the front of the power base. Connect the quick release battery
connectors to the new front battery.
16. Reinstall the top cover by sliding the rear of the top cover under the lip of the rear door and then sliding into
place.
17. Reinstall the front cover.
18. Return the seat to an upright position.
19. Reinstall the detent pin into the top of the actuator and ensure that it is secure. See figure 7.
20. Charge the batteries. See VI. “Batteries and Charging.”
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Q6 Edge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Q6 Edge in the language / languages: English as an attachment in your email.

The manual is 13,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info