721981
14
Zoom out
Zoom in
Previous page
1/34
Next page
14 Legend
Main Circuit Breaker
When the voltage in your Scooters batteries becomes low or your Scooter is heavily strained because of exces-
sive loads, the main circuit breaker may trip to protect your Scooters motor and electronics from damage. When
your Scooters main circuit breaker trips, the reset button pops out and your Scooter shuts down. If this occurs,
perform the following steps.
1. Allow a minute or so for your Scooters electronics to rest.
2. Push in the reset button to reset the circuit breaker.
Rear Storage Compartment
This compartment is for storing the charger power cord.
Manual Freewheel Lever
Whenever you want to push your Scooter for short distances, you can put it in manual freewheel mode.
WARNING! It is important to remember that when your Scooter is in manual freewheel mode, the
braking system is disengaged. Even though the motor is disengaged from the drive system when
your Scooter is put in manual freewheel mode, the motor can still run if the throttle lever is pushed.
Follow these safety rules when using the manual freewheel mode:
nDo not disengage the drive motors when your Scooter is on an incline; the Scooter could roll
down on its own and cause injury.
nBefore placing your Scooter into or taking it out of manual freewheel mode, ensure the key is
removed from the key switch.
nNever sit on your Scooter when it is in manual freewheel mode.
nWhen you have finished pushing your Scooter, always return it to the drive mode to lock the
brakes.
nThe manual freewheel lever is located on the end of the motor/transaxle assembly at the right rear of the
Scooter. See figure 8.
nPull up on the manual freewheel lever to disable the drive system and the brake system; you will then be
able to push your Scooter.
nPush down on the manual freewheel lever to reengage the drive and brake systems, and take your Scooter
out of manual freewheel mode.
Charger Power Cord Receptacle
This receptacle enables you to plug the charger power cord into the Scooter. For further details on using the
charger power cord, refer to V. Batteries and Charging.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electricity from the batteries into con-
trolled mechanical energy that drives the Scooters wheels.
Ammeter
When the battery charger is plugged into a wall outlet, the ammeter indicates the charging status of your Scooters
batteries.
nWhen your Scooters batteries are fully charged, the amperage reading is at or near zero (0) amps.
IV. DESCRIPTION
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Legend at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Legend in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Legend

Pride Legend User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info