722001

Pride Legend Classic XL-8 Manual

32
Zoom out
Zoom in
Previous page
1/39
Next page
32 www.pridemobility.com Legend Classic XL-8
VIII. DISASSEMBLY AND ASSEMBLY
To release the toggle latch:
1. Push in the toggle latch release button while pulling back the toggle latch. See figures 20 and 21.
2. Position the toggle latch buckle over the top of the toggle latch. See figure 22.
3. Lower the tiller to the scooter floorboard.
TOGGLE LATCH
TOGGLE LATCH RELEASE BUTTON
Figure 20. Toggle Latch (Latched) Figure 22. Buckle Secured
Figure 21. Toggle Latch (Unlatched)
TOGGLE LATCH BUCKLE
Figure 23. Frame Positioning
To separate the frames:
1. Push back on the seat post to pivot the rear section rearwards until the rear section is standing vertically on its
bumper. See figure 23.
2. Lift the front section up until the lower pegs are no longer in the slots. See figure 24.
3. Carefully move the front section away from the rear section.
Figure 24. Frame Sections
FRONT-TO-REAR HARNESS
CURVED LOCKING BRACKET
PEG
ASSEMBLY
1. Position the front and rear sections of your scooter as
shown in figure 24.
2. Align the lower slots of the front section with the corresponding
pegs on the front of the rear section. See figure 24.
WARNING! Position the front-to-rear
harness so it will not become pinched
between the frame halves when pivoting
the rear section forward. See figure 24.
3. Holding the seat post, slowly pivot the rear section forward
until the curved locking brackets are fully connected onto
the top rear pegs.
4. Raise the tiller.
5. Secure the toggle latch. See figure 21.
! Lower the toggle latch buckle.
! Push back on the toggle latch so it locks into place.
6. Connect the front-to-rear harness and both T-handle bat-
tery harnesses.
7. Reinstall the shroud.
8. Reinstall the seat, and lock it into place.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Legend Classic XL-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Legend Classic XL-8 in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info