793185
25
Zoom out
Zoom in
Previous page
1/124
Next page
Travel Scooter Series 25
I I I . B AT T E R I E S A N D C H A R G I N G
NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and contact your
local waste disposal agency or authorized Provider for instructions on disposal and battery recycling which is
our recommended course of action.
To change batteries in Battery Pack Style D (see fi gure 10):
1. Remove the seat and rear shroud. See VI “Disassembly and Assembly.”
2. Disconnect the battery harnesses and tie-down strap then remove the battery pack from the Travel Scooter.
See fi gure 22.
3. Unzip the battery pack to expose the batteries.
WARNING! To avoid confusion when replacing batteries, replace one battery at a time.
4. Disconnect the black (-) and red (+) battery cables from the battery terminals of the fi rst battery.
5. Remove the old battery.
6. Place the new battery into the battery pack.
7. Connect the red battery cable to the positive (+) battery terminal of the rst battery.
8. Connect the black battery cable to the negative (-) battery terminal of fi rst battery.
9. Repeat steps 4 through 8 for the other battery.
10. Completely zip the battery pack closed.
11. Reinstall the battery pack then connect the battery harnesses and battery tie-down strap.
12. Reinstall the rear shroud and seat.
To change batteries in Battery Pack Style E (see fi gure 11):
NOTE: If your Travel Scooter is equipped with a lithium battery, do not open or attempt to disassemble the
battery box or attempt to replace the lithium battery within the battery box. Contact your authorized provider
for a complete replacement battery box.
NOTE: If your travel Travel Scooter is equipped with lithium batteries, refer to the lithium battery insert
supplied with your travel scooter and the owners manual supplied with your battery charger for charging
instructions.
1. Remove the battery box from the travel scooter.
2. Turn the pack upside down.
3. Remove all screws that hold the battery box halves together. See fi gure 11.
4. Flip the battery box back over so the handle is up and remove the lid.
5. Remove the red (+) positive and black (-) negative battery cables from each battery.
6. Unfasten the reusable hook and loop straps from both batteries.
7. Remove the batteries.
8. Put the new batteries back into the battery box (battery terminals up and facing toward the center of the travel
scooter).
9. Fasten the reusable hook and loop straps around both batteries.
10. Reconnect the two (2) battery cables to the battery terminals. Make sure the red cable is connected to the
positive (+) terminal and the black cable is connected to the negative (-) terminal.
11. Replace the lid and carefully fl ip the battery box over so the handle is down.
12. Replace and tighten all the screws that hold the battery box together.
13. Reinstall the battery box back onto the travel scooter.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Go Go Endurance at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Go Go Endurance in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Go Go Endurance

Pride Go Go Endurance User Manual - German, Dutch, Italian - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info