793185
24
Zoom out
Zoom in
Previous page
1/124
Next page
24 Travel Scooter Series
I I I . B AT T E R I E S A N D C H A R G I N G
IDENTIFICATION KEY
1. Battery Tie-Down Strap
2. Front-to-Rear Harness
3. Battery Harness
NOTE: Some batteries require the removal of a nut and
bolt when disconnecting the battery cable from the battery
terminal. See fi gure 21.
To change batteries in Battery Pack Style B (see fi gure 10):
1. Disconnect the battery harness and remove the battery pack
from the Travel Scooter. See fi gure 22.
2. Unzip the battery pack to expose the batteries.
WARNING! To avoid confusion when replacing
batteries, replace one battery at a time.
3. Disconnect the black (-) and red (+) battery cables from the
battery terminals of the fi rst battery.
4. Remove the old battery.
5. Place the new battery into the battery pack.
6. Connect the red battery cable to the positive (+) battery
terminal of the fi rst battery.
7. Connect the black battery cable to the negative (-) battery
terminal of the fi rst battery.
8. Repeat steps 3 through 7 for the other battery.
9. Completely zip the battery pack.
10. Reinstall the battery pack and connect the battery harness.
Figure 22. Battery Tie-down Strap
To change batteries in Battery Pack Style C (see gure 10):
1. Remove the seat. See VI “Disassembly and Assembly.”
2. Remove the battery packs from the scooter. Always remove
the left side battery pack fi rst.
3. Remove the screw from side of pack, then remove the
seven screws from the underside of the pack.
4. Arrange the pack so the handle is facing up and slowly
remove the cover.
5. Disconnect the battery cables from the battery terminals by
removing the nut and bolt from each terminal.
6. Remove the old battery by detaching from reusable hook
and loop fasteners.
7. Place a new battery into the battery pack and secure with
reusable hook and loop fasteners.
8. In right battery pack, connect the red battery cable to
the positive (+) battery terminal, then connect the purple
battery cable to the negative (-) battery terminal.
9. In left battery pack, connect the purple battery cable to the
positive (+) battery terminal, then connect the black battery
cable to the negative (-) battery terminal.
10. Replace the battery pack cover, then reinstall the seven
screws that hold the pack together and tighten.
11. Reinstall screw in side of pack.
12. Reinstall the battery packs onto the scooter and engage the
battery pack locks. Always reinstall the right side battery
pack fi rst. See fi gure 23.
13. Reinstall the seat.
Figure 23. Battery Box Installation of models 66
and 67
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Go Go Endurance at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Go Go Endurance in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pride Go Go Endurance

Pride Go Go Endurance User Manual - German, Dutch, Italian - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info