722000
32
Zoom out
Zoom in
Previous page
1/39
Next page
32
www.pridemobility.com Destiny
VIII. DISASSEMBLY AND ASSEMBLY
Figure 14. Frame Separation
Figure 15. Frame Positioning
ASSEMBLY
To assemble the scooter:
1. Position the front and rear sections of your scooter as
shown in figure 15.
2. Align the locking brackets on the rear section with the
corresponding pegs on the front section.
3. Using the seat post, slowly pivot the rear section forward
until the locking brackets are fully connected to the pegs.
4. Reinstall the frame lock pin.
5. Raise the tiller.
6. Reinstall the batteries and tighten the battery straps.
7. Reconnect the battery cable connectors until the locking
tab engages, indicated by a “click.”
8. Reconnect the front-to-rear harness.
9. Reinstall the rear shroud.
10. Reinstall the upper seat post and secure it with the ball
detent pin.
11. Reinstall the seat and rotate it into place, then reinstall and
tighten the securement knob.
PEG
LOCKING BRACKET
FRAME LOCK PIN
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Destiny at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Destiny in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info