721998
33
Zoom out
Zoom in
Previous page
1/42
Next page
33
Cyclone
VIII. DISASSEMBLY AND ASSEMBLY
6. Lift both batteries from the Cyclone using the battery lifting strap located on the top of the battery.
7. Disconnect the handbrake cable from the rear hub by pushing forward and holding the brake release lever
withyour thumb. See figure 22. Lift the cable release hook free of the peg and slide the handbrake cable free
of its slot on the brake mount. See figure 23. Move the cable safely out of the way.
8. Gently lower the tiller down to the Cyclone chassis.
9. Push the locking cam levers forward and remove the ball detent pins. See figures 24 and 25.
10. Gently slide the two sections of the Sport Scooter apart. See figure 26.
PUSH BRAKE
RELEASE LEVER
FORWARD
FIGURE 22. DISENGAGE HANDBRAKE CABLE
LIFT UP THE
CABLE RELEASE
HOOK
BRAKE
MOUNT
HANDBRAKE
CABLE
FIGURE 23. DISENGAGE HANDBRAKE CABLE
FIGURE 25. BALL DETENT PINS WITH RINGS
UNLOCKED POSITION
FIGURE 24. LOCKING CAM LEVERS
FIGURE 26. SEPARATING THE FRAME SECTIONS FIGURE 27. MOTOR HARNESS
NOTE: There is no need to disconnect the motor harness when disassembling the Cyclone. See figure 27.
UNLOCKED POSITION
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Cyclone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Cyclone in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info