721988
25
Zoom out
Zoom in
Previous page
1/48
Next page
25
Colt Twin www.pridemobility.com
IV. BATTERIES AND CHARGING
The off-board charger supplied with your scooter is equipped with a 115/230 voltage switch. Confirm that this
switch is in the proper position for your locality. If you are not sure what the voltage is in your country, contact
your local electricity provider before inserting the charger power lead plug into your electrical outlet. If the
setting is incorrect, the charger will not function properly. Slide the voltage switch to the appropriate position.
See figure 10.
The LED lights on the charger indicate different charger conditions at various times: charger power on, charging in
progress, charging complete. Refer to the label on the charger for a complete explanation of these indicators.
Figure 10. Charger On/Off and Voltage Switches Figure 10A. Off-Board Charger
I
O
PLUGS INTO THE OFF-BOARD
CHARGER PORT
PLUGS INTO ELECTRICAL
OUTLET
VOLTAGE SWITCH
OFF
ON
If the off-board charger port is located on the tiller:
1. Position the front of your scooter close to a standard electrical outlet.
2. Remove the key from the key switch.
3. Make sure that the manual freewheel lever is in the drive position.
4. Make sure that the chargers on/off switch is in the OFF position. See figure 10.
5. Plug the 3-pin charger power lead into the off-board charger port. See figures 5 and 10A.
6. Extend the charger power lead and plug it into the electrical outlet.
7. Turn the charger on. We recommend that you charge the batteries for 8 to 14 hours.
8. When the batteries are fully charged, turn the charger off and unplug the charger power lead from the electrical
outlet and then from the off-board charger port.
If the off-board charger port is located on the battery box:
1. Position the rear of your scooter close to a standard electrical outlet.
2. Remove the key from the key switch.
3. Make sure that the manual freewheel lever is in the drive position.
4. Make sure that the chargers on/off switch is in the OFF position. See figure 10.
5. Plug the 3-pin charger power lead into the off-board charger port on the right battery box. See figures 5A
and 10A.
6. Extend the charger power lead and plug it into the electrical outlet.
7. Turn the charger on. We recommend that you charge the batteries for 8 to 14 hours.
8. When the batteries are fully charged, turn the charger off and unplug the charger power lead from the electrical
outlet and then from the off-board charger port.
25


Need help? Post your question in this forum.

Forumrules
1

Forum

pride-colt-twin

Reset search

  • On the colt twin pride do both batteries charge at the same time? When do I know both batteries are charged?
    Thanks Submitted on 15-3-2022 at 10:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Twin in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info