721987
28
Zoom out
Zoom in
Previous page
1/48
Next page
28
www.pridemobility.com Colt Pursuit
BATTERY TERMINALS UNDER BOOTS
IV. BATTERIES AND CHARGING
To change the batteries in your scooter:
WARNING! Do not lift beyond your physical
capability. Ask for assistance when neces-
sary while disassembling or assembling
your scooter.
1. Remove the seat and battery shroud.
2. Disconnect the battery tie-down strap.
3. Disconnect the battery harnesses by pulling them
straight up. See figure 12.
4. Disconnect the battery cables from the battery terminals
by sliding back the terminal boots and unscrewing the
nut from the bolt.
5. Remove the old batteries from the battery wells.
NOTE: If spacers are installed to secure the batteries,
make sure they are reinstalled correctly when placing new
batteries into the battery wells. See figure 25.
6. Place a new battery in each battery well. Face the battery
terminals of each battery away from the seat post. See
figure 13.
7. Connect the red battery cable to the positive (+) battery
terminal on each battery.
8. Connect the black battery cable to the negative (-) bat-
tery terminal on each battery.
9. Reposition the terminal boots over the battery terminals.
10. Reconnect the battery harnesses.
11. Reconnect the battery tie-down strap.
12. Reinstall the battery shroud and seat.
60 AMP
CIRCUIT BREAKER
BATTERY
BATTERY
125A/50V
Figure 12. Battery Removal/Installation
Figure 13. Battery Wiring Diagram
How do I change a battery in my scooter?
MANDATORY! Battery posts, terminals and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash
hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry and amp-
hour (Ah) capacity. Refer to the specifications table in this manual and in the
manual supplied with the battery charger for recommended type and capacities
WARNING! Do not mix old and new batteries. Always replace both batteries at the
same time.
WARNING! Contact your authorised Pride Dealer if you have any questions regard-
ing the batteries in your scooter.
WARNING! Do not replace the batteries while the scooter is occupied.
WARNING! The batteries on your scooter should only be serviced or replaced by
an authorised Pride Dealer or a qualified technician.
PROHIBITED! Keep tools and other metal objects away from battery terminals.
Contact with tools can cause electrical shock.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Pursuit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Pursuit in the language / languages: English as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info