722007
37
Zoom out
Zoom in
Previous page
1/48
Next page
37
Colt Series www.pridemobility.com
VII. DISASSEMBLY AND ASSEMBLY
Figure 27. Frame Release Lever
FRAME
RELEASE
LEVER
NOTE: The pivoting tiller is equipped with a
mechanism that will lock the front wheels in
place when the tiller is completely lowered and
secured.
3. Grasp and lift up on the frame release lever.
See figure 27.
4. Lift the front section up until the frame hooks
of the front section separate from the rear
section. See figure 28 or 28A.
5. Slowly separate the two sections. See figure 28
or 28A.
ASSEMBLY
1. Position the front and rear sections of your
scooter as shown in see figure 28 or 28A.
2. Use the frame release lever to lift the front
section as you align the frame hooks of the
front section with the lower frame tube of the
rear section. See figure 28 or 28A.
3. Once the frame hooks are over the lower
frame tube, lower the front section
completely. This will engage the frame lock.
4. Raise the tiller and fully tighten the tiller
adjustment knob.
5. Reinstall the batteries to the battery wells.
6. Connect both battery harnesses. See figure 26.
7. Secure the battery tie-down strap.
8. Reinstall the battery shroud.
9. Reinstall the seat and rotate it into place.
WARNING! After assembly, make
absolutely certain the tiller lock
knob is in the unlocked position
before driving the scooter.
LOWER FRAME TUBE
FRAME HOOKS
Figure 28A. Frame Separation (Colt Twin model only)
Figure 28. Frame Separation
FRAME HOOKS
LOWER FRAME TUBE
Figure 26. Harness Connections
BATTERY HARNESS CONNECTIONS
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Plus in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info