721986
22
Zoom out
Zoom in
Previous page
1/44
Next page
22
www.pridemobility.com Colt Executive
III. YOUR SCOOTER
SECURING THE SCOOTER
Always secure the scooter in a forward-facing position in the vehicle. Attach the four tie-down straps to
the designated securement points. See figures 10 and 10A. Tighten the straps to sufficiently remove all
slack. Never attach tie-downs to adjustable, moving or removable parts of the scooter such as armrests,
shrouds and wheels. These items should be removed. Position the anchor points for the rear tie-down straps
directly behind the rear securement points on the scooter. The front tie-down straps should anchor to floor
points that are spaced wider than the scooter to provide increased lateral stability.
WARNING! Ensure scooters are properly secured to the motor vehicle during transport.
Scooters that are not properly secured can become a hazard to the user and to other
vehicle passengers in the event of a crash, sudden stopping or swerving, as the scooter
could tip or slide out of place.
Figure 10. Front Section
Figure 10A. Rear Section
FRONT SECUREMENT POINTS
REAR SECUREMENT POINTS
Main Circuit Breaker
When the voltage in the batteries becomes low or
your scooter is heavily strained because of
excessive loads, the main circuit breaker may trip
to protect the motor and electronics from damage.
When the breaker trips, the entire electrical
system shuts down. See figure 9.
The reset lever flips down when the breaker
trips.
Allow a minute or so for the electronics to
“rest.”
Push the reset lever up until you hear a click to
reset the breaker.
If the breaker trips frequently, you may need to charge the batteries more often or have your authorised
Pride dealer perform a load test on the batteries.
If the main circuit breaker trips repeatedly, see your authorised Pride dealer for service.
NOTICE: If you are preparing the scooter for transport or service, or if there is a situation that requires
you to manually shut down the electrical system, press the manual shut-off button on the circuit
breaker. This will cut all power to the scooter.
MANUAL SHUT-OFF BUTTON
RESET LEVER
Figure 9. Main Circuit Breaker
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Colt Executive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Colt Executive in the language / languages: English as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info