721985
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
www.pridemobility.com Celebrity XL-8
Figure 22. Harness Connections
5. Unplug the front-to-rear and rear lighting harnesses by
squeezing the sides and pulling straight up. See figure 22.
6. Unplug both battery harnesses. Pull each harness
straight up. See figure 22.
7. Unfasten the battery tie-down strap and remove the
batteries from the battery wells.
WARNING! Failure to unplug both
battery harnesses, the front-to-rear
harness and rear lighting harness prior
to separating the front and rear
sections could result in permanent
damage to the scooter.
Handbrake Cable Disconnect
1. Locate the quick disconnect body. See figure 23.
2. Pull the quick disconnect handle back from the quick
disconnect body.
3. Position the quick disconnect handle over the top of the
quick disconnect body.
4. Separate the brake cable from the cable clamp located
inside the quick disconnect body. See figure 24.
Frame Separation
1. Squeeze the tiller adjustment lever and lower the tiller
to its lowest point.
2. Lift up on the frame release lever. See figure 25.
3. Lift the front section up until the frame hooks of
the front section separate from the rear section.
See figure 26.
NOTE: Stabilise the rear section with your free hand
by holding onto the upper frame tube. See figure 26.
4. Slowly separate the two sections. See figure 26.
ASSEMBLY
1. Position the front and rear sections of your scooter as
shown in figure 26.
2. Use the frame release lever to lift the front section as
you align the frame hooks of the front section with the
lower frame tube of the rear section. See figure 25.
3. Once the frame hooks are over the lower frame tube,
lower the front section completely. This will engage
the frame lock. See figure 25.
4. Raise the tiller.
VII. DISASSEMBLY AND ASSEMBLY
BATTERY HARNESSES FRONT-TO-REAR HARNESS
REAR LIGHTING
HARNESS
Figure 24. Handbrake Cable Release
Figure 23. Quick Disconnect Handbrake Cable
QUICK
DISCONNECT
BODY
QUICK DISCONNECT HANDLE
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Celebrity XL8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Celebrity XL8 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info