721984
34
Zoom out
Zoom in
Previous page
1/41
Next page
34
www.pridemobility.com Celebrity X-6
Figure 23. Harness Connections
4. Gently pull the rear shroud up and off of the rear
section of the scooter.
5. Unplug the front-to-rear and rear lighting harnesses
by squeezing the sides and pulling straight up.
6. Unplug both battery harnesses. Pull each harness
straight up. See figure 23.
7. Unfasten the battery tie-down straps and remove
the batteries from the battery wells.
WARNING! Failure to unplug both
battery harnesses, the front-to-rear
harness and rear lighting harness
prior to separating the front and rear
sections could result in permanent
damage to the scooter.
Frame Separation
1. Lift up on the frame release lever. See figure 24.
2. Lift the front section up until the frame hooks of the front
section separate from the rear section. See figure 25.
NOTE: Stabilise the rear section with your free
hand by holding onto the upper frame tube.
3. Slowly separate the two sections. See figure 25.
ASSEMBLY
1. Position the front and rear sections of your scooter as
shown in figure 25.
2. Use the frame release lever to lift the front section as
you align the frame hooks of the front section with the
lower frame tube of the rear section. See figure 24.
3. Once the frame hooks are over the lower frame
tube, lower the front section completely. This will
engage the frame lock. See figure 24.
4. Raise the tiller and fully tighten the tiller adjustment knob.
5. Reinstall both batteries and secure with tie-down straps.
6. Connect the front-to-rear harness, rear lighting har-
ness and both battery harnesses. See figure 23.
7. Reinstall the rear shroud.
8. Reinstall the seat and rotate it until it locks into place.
9. Unlock the front wheel by turning the tiller lock knob
90° anticlockwise. See figure 22A.
WARNING! After assembly, make
absolutely certain the tiller lock
knob is in the unlocked position
before riding your scooter.
Figure 24. Frame Release
Figure 25. Frame Separation
VIII. DISASSEMBLY AND ASSEMBLY
LOWER FRAME TUBE
FRAME HOOK
BATTERY HARNESSES
FRONT-TO REAR HARNESS
FRAME HOOK
FRAME RELEASE LEVER
REAR LIGHTING
HARNESS
UPPER FRAME TUBE
FRAME LOCK
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pride Celebrity X6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pride Celebrity X6 in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info