581012
45
Zoom out
Zoom in
Previous page
1/66
Next page
11. NIEUWE ACCESSOIRE GEBRUIKEN
Als u een nieuwe accessoire in gebruik neemt, dient deze bij de trainingscomputer aangemeld te worden.
Dit wordt koppelen genoemd en duurt slechts enkele seconden. Zo wordt gewaarborgd dat uw
trainingscomputer alleen signalen van uw accessoire ontvangt, waardoor u storingsvrij kunt trainen in een
groep.
Nieuwe snelheidssensor koppelen aan trainingscomputer
Zorg dat de snelheidssensor correct gemonteerd is.
1. Kies Menu > Settings (Instellingen) > Sport profiles (Sportprofielen) > Cycling (Bike 1) (Fietsen – Fiets
1) > Bike 1 settings (Instellingen fiets 1) > Speed sensor (Snelheidssensor) > Search new (Nieuwe
zoeken) en druk op OK.
2. Press OK to start the test drive (Druk op OK om de test te starten) verschijnt.
3. Druk op OK en Searching for new speed sensor (Nieuwe snelheidssensor zoeken) verschijnt. De
trainingscomputer begint naar het signaal van de snelheidssensor te zoeken. Draai het wiel enkele malen
rond om de sensor te activeren. Het knipperende rode licht geeft aan dat de sensor geactiveerd is.
4. Als de nieuwe snelheissensor is herkend, verschijnt Speed sensor is found (Snelheidssensor gevonden).
De koppeling is voltooid.
5. Als het zoeken geen resultaat oplevert, verschijnt Speed sensor not found (Snelheidssensor niet
gevonden) of Other speed sensors interfering. Move further. (Storing door andere snelheidssensoren.
Verplaats u.)., Try again? YES / NO (Opnieuw proberen? Ja/Nee) verschijnt.
6. Kies YES (Ja) om opnieuw te gaan zoeken.
7. Kies NO (Nee) om het zoeken te staken.
8. Houd de knop TERUG even ingedrukt om terug te gaan naar de tijdweergave.
Zie de gebruiksaanwijzing van de snelheidssensor of video-instructies op
http://www.polar.com/en/support/video_tutorials voor meer informatie over het monteren van de
snelheidssensor.
Nieuwe trapfrequentiesensor koppelen aan trainingscomputer
Zorg dat de trapfrequentiesensor correct gemonteerd is.
1. Kies Menu > Settings (Instellingen) > Sport profiles (Sportprofielen) > Cycling (Bike 1) (Fietsen – Fiets
1) > Bike 1 settings (Instellingen fiets 1) > Cadence sensor (Trapfrequentiesensor) > Search new
(Nieuwe zoeken) en druk op OK.
2. Press OK to start the test drive (Druk op OK om de test te starten) verschijnt.
3. Druk op OK en Searching for new cadence sensor (Nieuwe trapfrequentiesensor zoeken) verschijnt. De
trainingscomputer begint naar het signaal van de trapfrequentiesensor te zoeken. Draai het wiel enkele
malen rond om de sensor te activeren. Het knipperende rode licht geeft aan dat de sensor geactiveerd is.
4. Als de nieuwe trapfrequentiesensor is herkend, verschijnt Cadence sensor is found
(Trapfrequentiesensor gevonden). De koppeling is voltooid.
5. Als het zoeken geen resultaat oplevert, verschijnt Cadence sensor not found (Trapfrequentiesensor niet
gevonden) of Other cadence sensors interfering. Move further. (Storing door andere
trapfrequentiesensoren. Verplaats u.)., Try again? YES / NO (Opnieuw proberen? Ja/Nee) verschijnt.
6. Kies YES (Ja) om opnieuw te gaan zoeken.
7. Kies NO (Nee) om het zoeken te staken.
8. Houd de knop TERUG even ingedrukt om terug te gaan naar de tijdweergave.
Zie de gebruiksaanwijzing van de trapfrequentiesensor of video-instructies op
http://www.polar.com/en/support/video_tutorials voor meer informatie over het monteren van de
trapfrequentiesensor.
NEDERLANDS
Nieuwe accessoire gebruiken 45
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Presto Pressure Canner and Cooker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Presto Pressure Canner and Cooker in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info