636661
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
Problem
I can’t hear anything (no
volume) from the speaker.
I can transmit, but no one
can hear me.
Thedisplayashes,andI
don’t know why.
I can’t read the display.
The display is too bright
at night.
I can’t see any words on
the display.
I’m not getting any GPS
data on my display.
I’m not getting any hazard
alerts.
I’m getting all the hazard
alerts, not just the ones for
my area.
Ican’tmakeGroupDSC
calls.
WherecanIndmy
radio’sserialnumber?
The radio won’t let me
enter my User MMSI.
WhatdoIdo?
Things to Try
Adjust the squelch level; it is probably too high.
Check your UIC channel settings (see Setting the UIC channel mode
(USA/CAN/INT) on page 8).
Thedisplaywillashiftheradioisinawatchmodeorinscanmode.
Tryturningoffscanning,WeatherAlertWatch,orTriple/DualWatch
(see page 16.)
Adjust the contrast and backlight brightness level (see page 18)
Adjust the backlight brightness level.
Turn off the radio; hold CALL-MENU button and turn it back on (see
page 18)
Reset the radio back to the default brightness level: turn off the radio;
hold the CALL-MENU button and turn it back on.
Make sure your GPS receiver is correctly connected (see Connecting
to a GPS receiver, page 32).
Make sure your GPS receiver is working properly. Make sure that your
GPS receiver supports the NMEA parameters described in NMEA
Operation on page 45.
Make sure Weather Alert Watch is turned on.
Check to make sure the FIPS codes in your radio include your current
location (see Using FIPS codes for weather alerts on page 17).
Check to make sure the FIPS codes in your radio were entered cor-
rectly (see Using FIPS codes for weather alerts on page 17). Some-
times the Weather Alert Watch may catch a hazard alert in the middle
of the broadcast and miss which FIPS codes are affected. For your
safety, the radio triggers the alert tone and switches to the weather
channel when this happens.
Make sure the Group MMSI was entered correctly.
Look on the right side of the radio (the side with the microphone cord),
behind the mounting bracket.
Contact customer service.
Engine Noise Suppression
Interference from the noise generated by the electrical systems of engines is sometimes a
problem with radios. Your radio has been designed to be essentially impervious to ignition
noise and alternator noise. However, in some installations it may be necessary to take meas-
urestofurtherreducetheeffectofnoiseinterference.Yourradio’sDCbatterywires,antenna
lead, and accessory cables should be routed away from the engine and engine compart-
ment, and from power cabling carrying high currents. In severe cases of noise interference, it
may be necessary to install a noise suppression kit. Contact the dealer where you purchased
the radio for more information.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President MC 8000 DSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President MC 8000 DSC in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of President MC 8000 DSC

President MC 8000 DSC User Manual - English - 40 pages

President MC 8000 DSC User Manual - German - 36 pages

President MC 8000 DSC User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info