636661
31
Zoom out
Zoom in
Previous page
1/48
Next page
31
1. Install the radio into the mounting bracket.
2. Position the
radio into the
desired loca-
tion.
Mark the
edges of the
bracket on
the mounting
surface.
3. Remove the
mounting
bracket drill
template
from the
back of the
manual,
and use the
template to
mark the drill
holes on the
mounting surface.
4. Drilltheholesforthemountingbracket;besuretofollowanyspecialrequirementsof
the mounting surface.
5. Remove the bracket from the
radio, and use the mounting
hardware to secure the bracket
to the mounting surface.
6. Install the radio back into the
mounting bracket.
Connecting the radio
To operate correctly, your radio re-
quires two electrical connections:
• providing it with power from the
boat’s electrical system.
• connecting a VHF-FM marine an-
tenna to the antenna connector.
1
2
Step 1:
Slide the radio
into the mounting
bracket.
Step 2:
Tighten the mounting knobs
to secure the radio in place.
Hex bolt
Washer
Spring washer
Hex nut
Mounting
bracket
Mounting
surface
Power Supply Requirements
Nominal13.8VDCpowersupplywithanega-
tiveground(10.5VDCto16.0VDC).
Power leads should be kept as short as pos-
sible. A direct connection to the power supply
is ideal. Minimum of #14 AWG copper wire for
extensionsupto20feet,12AWGwireforexten-
sions from 20 to 35 feet, or 10 AWG wire for
extensionsfrom35to60feet.
VHF Antenna Requirements
Male PL-259 connector
50Ωimpedance
Minimum 4 foot, 3 dB rated antenna for sail-
boats or 8 foot, 6dB rated antenna for power-
boats
Minimum RG-58 lead-in wire for antenna leads
up to 20 feet, RG-8X for antenna leads from 20
to 35 feet, or RG-8U for antenna leads from 35
to 60 feet.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President MC 8000 DSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President MC 8000 DSC in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of President MC 8000 DSC

President MC 8000 DSC User Manual - English - 40 pages

President MC 8000 DSC User Manual - German - 36 pages

President MC 8000 DSC User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info