636660

President MC 6800 DSC Manual

47
Zoom out
Zoom in
Previous page
1/68
Next page
47
9. INSTALLATION
1. The Set Installation
The radio should be sited so that engine noise and vibration or other background noise does
not make it difficult for the operator to hear.
It is recommended that it is not installed where it will be exposed to continuous direct sun-
light, as this will eventually damage the LCD display.
As microphones and loudspeakers contain powerful magnets, the radio should not be in-
stalled within 1m (3ft 3in) of any compasses, whether magnetic or electronic.
The fins on the back of the case act as a heat sink to dissipate heat generated by the set
when in use, which maintains the high efficiency of the radio. The free circulation of air is
essential - if mounting the radio in an enclosed space ensure that the space is vented.
The MC 6800 DSC Radio is supplied with a reversible mounting bracket. This can be used to
mount the radio on the chart table or on an overhead bulkhead (Fig A). The bracket is fixed in
place using four screws (supplied). Before installing, ensure that there is at least 88mm(3.5
in) verticals clearance and 127mm (5in) horizontal clearance behind the bracket to allow the
radio to fit (Fig B). The rake angle of the radio can be adjusted by slackening the clamp.
Desktop mounting Overhead mounting
2. Electrical Installation
The MC 6800 DSC Radio has four electrical connections – the handset/fistmike socket is on
bottom right of the front panel. On the bottom right of the back of the case there are three
flying leads – the first is DC power cord (the red wire is positive, black is negative.), the
second is speaker cord (the black wire is ground), the final is the GPS interface cord (the
Brown wire is Ground).
Desktop mounting Overhead mounting
Mounting on dashboard
Mic socket
12 V DC power cord
External speaker cord
GPS cord
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President MC 6800 DSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President MC 6800 DSC in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info