Manual President MC 6800 DSC (page 44 of 68) (English, German, French, Spanish)

636660

Zoom out

Zoom in

1/68

Note that the time should be UTC (GMT) and entered in 24 hours clock format.

5. Set Manual Position

If the position of the vessel cannot be obtained from a navigator via the NMEA0183 input, this

date can be entered manually. Press “MENU” key to select the “POSITION/UTC” screen as

follows, and then use the keypad to enter the required data as follows.

Press “ENT” key to accept the position and time entered.

If no data is being received from the NMEA input, a “!” symbol will appear on the main screen,

and will flash 4 hours later after the last position was input and prompt the operator to enter

the current position. After 23 hours, if the radio has not received any position data either

manually or from the UMEA input, then the position data will disappear from the screen, and

it will show “NO POSITION” if a Distress Alert is transmitted.

6. Set call channels

The Radio includes a list of 9 working channels, which can be scrolled through when using

the Routine, Safety or Group Calling. The first four channels are preset as 06, 08, 72 and 77.

These cannot be amended. The remaining five channels are programmable.

Press “MENU” key to select “CHANNELS” screen ssas follows.

Always consult your local authority requirements when choosing suitable working channels.

Be aware of which channels are Duplex and will not allow ship to ship communication.

Use ▲ or ▼ key to select inserting or deleting channel screen, then press “ENT” key for enter.

The “CHANNELS-INS” screen is as follows (insert the 5th channel):

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of President MC 6800 DSC in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

President MC 6800 DSC Manual

Product: