636660

President MC 6800 DSC Manual

40
Zoom out
Zoom in
Previous page
1/68
Next page
40
Press the “ENT” key again to make the call. When the call is sent, the radio will be set to the
working channel. Allow a few seconds for the stations receiving the call to switch to the
working channel. Then make a normal voice call on the selected working channel.
3. Group Call
If a group ID has been set up for the Radio. A call can be made to other members of the
group.
Press the “CALL” key on the keypad to select the group call screen as follows.
Select a working channel from the channel list by pressing the ▲ or ▼ keys on the keypad.
Press “ENT” to send the call, allow a few seconds for the other members of the group to
reach the radios (all VHF radios in the group should automatically switch to the selected
working channel upon acknowledgement), then make a normal voice call using the working
channel.
4. Distress Alert
Turn away the protective cover and press “DIST” key on the fist mike or on radio. The Dis-
tress Alert screen will be displayed as follows.
If time permits, press the or keys to select the nature of the distress. There are 10
categories recognized as Distress Alert situations. Which are – fire, flooding, collision, ground-
ing, listing, sinking, adrift, abandoning, piracy and man overboard. There is also a default
undesignated category, which is used if no category is selected here.
Press and hold the “DIST” key for about five seconds. An alarm will sound and a countdown
to the transmission will be displayed.
The Distress Alert transmission contains the following data:
• The vessel’s MMSI;
• The vessel’s position (either from the NMEA0183 input, or manually entered);
• The time (from NMEA or manual);
• The nature of the distress.
After the Distress Alert has been sent, the Radio will automatically tune to channel 16 and the
Radio will repeat the Alert approximately every four minutes until either an acknowledgement
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President MC 6800 DSC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President MC 6800 DSC in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info