636621
32
Zoom out
Zoom in
Previous page
1/56
Next page
32
A “Beep” sounds each time the channel/frequency changes if the BEEP
function is activated (see KEY BEEP function page 33).
In MENU status, the s/t keys allows to select menu.
11) LCD
Indicates transmission
Indicates that front panel keys are locked except PTT pedal
and knobs. LCD shows Err when locked key is pressed
Beep function activated
on TX, bargraph shows Standing Wave Ratio (SWR) and value
(see INDIC function following)
ROGER ROGER BEEP function is activated
ECHO ECHO function is activated
DW DUAL WATCH activated
10K Frequency +10K function is activated
NB NB filter activated
ANL ANL filter activated
HI-CUT HI-CUT filter activated
EMG The emergency channel 9 or 19 activated
SCAN SCAN function activated
Automatic Squelch Control activated
VOX VOX function activated
MEM Memorised frequency is selected
DCS DCS code is used
CTCSS CTCSS tone is used
AM AM mode selected
FM FM mode selected
USB USB mode selected
LSB LSB mode selected
CW CW mode selected
PA PA (Public Address) mode selected
Shows the channel number
Shows the current Band
Shows DCS code or CTCSS tone
Shows the frequency and menu values
12) INDIC ~ CALL
INDIC
(short press)
Press INDIC key (12) to display current voltage, shows as 13.8DCin LCD.
Press INDIC key (12) again or wait for 5 seconds to disable voltage display.
In TX, press INDIC key (12) to select the feature to be displayed. LCD alter-
nates with: FREQUENCY ~ SWR ~ TOT ~ VOLTAGE. Every time the PTT pedal is
pressed, LCD shows frequency and selected feature.
CALL (long press)
Press INDIC-CALL key (12) every time to send pre-edi ting prompt voice code
calling. LCD shows “TX”. (see § CALL FREQUENCY, page ).
13) ECHO ~ ECHO SET
ECHO
(short press)
Press ECHO key (13) to enable/disable ECHO function. LCD shows “ECHO”.
ECHO SET (long press)
Press ECHO-ECHO SET key (13) to set ECHO VOLUME level and ECHO TIME.
“ECHO” blinks on the LCD.
Press s/t keys (10) on the unit or on the microphone (24) to select alternately
or on the menu list.
Ratate PUSH knob (6) to set the selected feature. There are 32 DELAY levels,
default: 10. There are 32 “TIME”, default: 1. LCD shows selected
level or selected .
Press MEM-STORE (5) key for 2 seconds to store and skip into next menu.
Wait for 5 seconds to exit ECHO SET.
14) CH9/19 ~ LOCK
CH9/19
(short press)
English
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President Lincoln II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President Lincoln II in the language / languages: English, French, Polish, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info