636619
33
Zoom out
Zoom in
Previous page
1/52
Next page
33
a) press MEM during the scanning cycle of the channels. «MEM» is displayed.
The transceiver scans the active memories (M1, M2, M3) and channels 19
and 9.
b) press SCAN during the recall cycle MEM of the memories. «SCAN» is displayed.
The transceiver scans the active memories (M1, M2, M3) and channels 19
and 9.
M2 (see § 9)
8) AM/FM ~ LOCAL ~ M1
AM/FM
(short push)
This switch allows to select the modulation mode AM or FM.
Your modulation mode must correspond with the one of the person you are
speaking to.
AM/ Amplitude Modulation (AM) is for communications in areas where there
are obstacles and over medium distances.
FM/ Frequency Modulation (FM) is for nearby communications in flat, open
areas.
AM/FM 2
nd
function (only in U configuration)
Allows to alternate the frequency bands CEPT and ENG in the U configura-
tion. When the ENG frequency band is selected, «UK» is displayed.
LOCAL (long push)
Allows the automatic adjustment of the RF Gain for close communication.
«LOCAL» is displayed.
M1 (see § 9)
9) MEM ~ F
MEM
3 channels can be memorized with following parameters: AM (except for
EC and U configurations) or FM; LOCAL; NB/ANL; HICUT (and CEPT/ENG in
the U configuration)
To memorize:
- press shortly on MEM, «MEM» blinks.
- Press during 1 s on M1, M2 or M3. «MEM» is displayed continuously. The
channel has been memorized.
To recall a memory:
- press shortly on MEM, «MEM» blinks.
- press shortly on M1, M2 or M3.
- «MEM» is displayed continuously. The memorized channel is active.
To delete a memory:
- turn off the transceiver.
- keep key M1, M2 or M3 pressed and switch on the transceiver.
- the selected memory is deleted.
F - FREQUENCY BAND SELECTION
(configuration: E; d; EU; EC; U; PL)
The frequency bands must be chosen according to the country where you
are going to operate. Do not use another configuration. Some countries
require user’s licence.
See the table on page 51.
How to proceed:
- switch off the transceiver
- press and hold the F key and switch on the transceiver. «F» blinks and the
letter corresponding to the configuration blinks.
- In order to change the configuration, use the / keys on the front panel
or UP and DN on the microphone.
- When the configuration is selected, press on the F key during 1 s. «F» and
the letter corresponding to the configuration is continuously displayed. At
this stage, confirm the selection by switching off then switching on again the
transceiver.
See tables on page 47 ~ 5t0.
10) 6-PIN MICROPHONE PLUG
This plug is situated on the front panel, thereby making it easier to set the
equipment into the dashboard. See the cabling diagram on page 49.
11) PTT (push to talk)
Press this knob to transmit a message and release to listen to an incoming
communication.
A) DC-POWER TERMINAL (13.2 V)
B) ANTENNA CONNECTOR (SO-239)
C) EXTERNAL SPEAKER JACK (8 , Ø 3.5 mm)
English
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President Johnson II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President Johnson II in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of President Johnson II

President Johnson II User Manual - German - 20 pages

President Johnson II User Manual - Dutch, French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info