636593
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
- if the 12 volt power supply is deconnected
and/or
- after a long depression (more than four seconds) of the POWER key (radio on
or off). In these two cases, the CB is blocked and it is necessary to enter the
correct access code. The access code, established by PRESIDENT in the
factory or after being returned to the After Sales Service department is:
4 short depressions of the
PROGRAM key.
WARNING : If you forget your access code, you are advised to contact your
dealer. We strongly advise you to make a note of your code.
HOW TO PERSONALIZE YOUR ACCESS CODE:
Please carefully read this procedure before changing the access code.
a)Turn your CB on by pressing «POWER».
b)Turn your CB off by pressing «POWER».
c) Depress «POWER» and keep depressed: your CB goes on and then goes off.
d) Depress both «NB/ANL» and «PROGRAM» while keeping «POWER» depressed.
e) Release «POWER», but keeping «NB/ANL» and «PROGRAM» depressed:
flashes in the display for 5 seconds.
f) When
disappears: Release the keys «NB/ANL» and «PROGRAM».
g) flashes again. You have 20 seconds in which to enter the old code.
h) Press the first key of the old code («PROGRAM» in the original configuration)
appears in the display.
i) Press the second key of the old code («PROGRAM» in the original configuration)
appears in the display.
j) Press the third key of the old code («PROGRAM» in the original configuration)
appears in the display.
k) Press the fourth key of the old code («PROGRAM» in the original configuration).
A beep sounds and the letter
appears in the display which indicates that
your radio CB is ready to register the new code (4 key code).
l) Depress the first key of the new code choosing between «M1», «M2», «M3»,
«M4», and «PROGRAM»:
appears in the display as well as the letter .
m)Depress the second key of the new code choosing between «M1», «M2»,
«M3», «M4», and «PROGRAM»:
appears in the display as well as the letter .
n) Press the third key of the new code choosing between «M1», «M2», «M3», «M4»,
and «PROGRAM»:
appears in the display as well as the letter .
o) Press the fourth key of the new code choosing between «M1», «M2», «M3»,
«M4», and «PROGRAM» : The display goes out.
p) Depress «POWER»: your CB lights up and the new code is memorised.
- If you make a mistake while entering the old access code, press any key
(several times if necessary) until
flashes in the display and then continue
from step g).
- If, while entering the new access code, you press a key other than «M1», «M2»,
«M3», «M4», or «PROGRAM» (eg SCAN) your CB automatically goes to point l).
6-PIN MICROPHONE PLUG
1 Modulation
2RX
3TX
4 Up/Down
5 Masse
6 Alimentation
15


Need help? Post your question in this forum.

Forumrules
1

Forum

president-george

Reset search

  • which button on a president george is the function button Submitted on 2-10-2021 at 12:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for President George at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of President George in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of President George

President George User Manual - Dutch, French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info