• Connect the brown wire to the terminal labelled "L".
• Connect the blue wire to the
terminal labelled "N".
• Connect the green/yellow wire to
the terminal labelled with the earth
symbol or "E".
• Make sure that the cord-grip is
positioned correctly (over the outer
sheath of the cable) and it fully
tightened.
OPERATING COSTS
At time of going to press, the average cost of electricity is £0.12
per unit (kilowatt-hour). The amount you are being charged will be
shown on your electricity bill.
At this cost, the appliance will cost 9½p per hour to run on the 800
W setting, or 19p per hour to run on the 1600 W setting.
FAULT-FINDING
If the appliance is not operating, proceed as follows:
Check that the mains plug is firmly in the socket, and that the
socket is switched ON.
Press the ON button to switch at least one of the heating elements
on.
Check that the timer is not selected.
The appliance also has a overload protection device to prevent
overheating. If this operates, disconnect the appliance from the
mains supply, and remove any objects on or adjacent to the
appliance that could have caused the overheating. Wait 10
minutes, and reconnect to the mains supply.
If the appliance still does not function, or the overload protection
device operates again, consult an authorised service agent.
The appliance is also fitted with a tip-over switch which will
disconnect the power if if falls over. If it does not operate, make
sure that it is standing upright.
Page 5
