Manual Prem-i-air EH1418 (page 6 of 15) (English, French)

558624

Zoom out

Zoom in

1/15

Page 6

If the mains lead is damaged, it must be replaced by the manufacturer or an

authorised service centre. If the mains plug needs to be replaced, proceed as

follows:

Connect the brown wire to the

terminal labelled "L".

Connect the blue wire to the terminal

labelled "N".

Connect the green/yellow wire to the

terminal labelled with the earth

symbol or "E".

Make sure that the cord-grip is

positioned correctly (over the outer

sheath of the cable) and it fully

tightened.

If the plug is fitted with a 13 A fuse, replace it by a 5 A fuse.

FAULT FINDING

Appliance does not operate when switched on:

• There is a 3 minute delay before the compressor starts. This is to protect the

compressor.

Appliance stops operating and "FULL" indicator lights.

• Bucket is full of water - empty the water as shown on page 6. Do not drink the

water (it may be used for watering plants).

• Bucket is not replaced properly. Ensure that the bucket is correctly aligned with

the housing.

Appliance stops operating and P1 is displayed.

• This happens if the temperature is lower than 10 °C, and ice begins to form on

the internal heat exchanger. The defrost cycle will last for a few minutes, and

then operation will resume.

Appliance operates intermittently.

• The humidity in the room has reached the level set on the humidistat control.

Very little water is extracted.

• There is very little humidity in the air (this happens during dry sunny weather,

and also during very cold weather). Condensation on windows is caused by the

difference between indoor and outdoor temperatures, and is not a good indicator

of the level of humidity.

The room remains humid and little water is extracted

• The humidity setting is too high, press the ˜ button to reduce the required

humidity level.

• The area to be dehumidified is too large

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Prem-i-air EH1418 in the language / languages: English, French as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Prem-i-air EH1418 Manual

Product: