604269
100
Zoom out
Zoom in
Previous page
1/133
Next page
Assembling the Exercise Bike 21
4. Remove the four #10 x 1-inch self-tapping screws holding
the left side cover in place, then pull the cover away from
the body assembly. Guide the cover around the pedal
crank, then remove it and set it aside.
Figure 4: Side cover removal
5. Remove the tape holding the base unit data cable in place
inside the upright support channel.
6. Slide the jack panel up and out of its bracket in the right
side cover.
To install the upright support and prepare the cables for
connection to the console:
1. Remove the nut and washer from one end of the F-type
coaxial coupler packed with the P80 console. Insert that
end of the coupler through the round opening in the jack
panel.
2. Place the washer back onto the coaxial coupler, followed
by the nut. Use two ⁷₁₆-inch open-end wrenches to secure
the coupler; hold the coupler in place with one wrench
while tightening the nut with the second wrench.
3. Locate the tabbed end of the modular plug coupler. Snap
this end of the coupler into the square opening in the jack
panel.
4. Slide the quick-disconnect terminal on the grounding lead
of the power cable over the grounding terminal on the
equipment frame.
5. Attach the lower ends of the following cables to the inner
side of the jack panel:
Ethernet cable
Television cable (for P80 console)
Power cable (for P80 console)
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor UBK 885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor UBK 885 in the language / languages: English as an attachment in your email.

The manual is 7,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Precor UBK 885

Precor UBK 885 User Manual - German - 124 pages

Precor UBK 885 User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info