Product Owner's Manual: Maintenance 32
EFX: Cleaning the Ramp
Whenever the ramp becomes soiled, clean the exposed surfaces
of the ramp and roller wheels by performing the following steps.
Note: If your equipment has a ramp cover, remove it before
performing the following steps. Refer to the EFX Assembly Guide.
1. Moisten a clean, soft cloth in a mild solution of soap and water.
2. Position one foot pedal at the top of the ramp (the other will
automatically be positioned at the bottom).
3. Clean the exposed portions of the ramp.
4. Gently lift the roller wheels. Rotate each wheel while wiping it
with the clean, soft cloth.
5. Switch the foot pedal position and finish cleaning the ramp.
Storing the Chest Strap
If you purchased the optional heart rate chest strap, store it in a
place where it remains free of dust and dirt (for example, in a closet
or drawer). Be sure to protect the chest strap from extremes in
temperature. Do not store it in a place that may be exposed to
temperatures below 32° F (0° C).
To clean the chest strap, use a sponge or soft cloth dampened in
mild soap and water. Dry the surface thoroughly with a clean towel.
Signals used by the Chest Strap Transmitter
(or heart rate strap) may interfere with
pacemakers or other implanted devices.
Consult your physician and the manufacturers
of your Chest Strap Transmitter and
implanted device before using a Chest Strap
Transmitter.
Note: To receive an accurate reading, the strap needs to be in
direct contact with the skin on the lower sternum (just below the
bust line for women).
