56 Assembling and Maintaining TRM 800-Series Treadmills
Testing Safety Features
Before any exerciser uses the treadmill, verify that the stop
switch, the STOP button, and the Auto Stop feature are all
working correctly.
To test the restart switch:
1. Start any workout on the treadmill.
2. Give the safety clip lanyard a slight tug. The restart switch
should pop up and the treadmill should slow to a stop
immediately.
3. Press the restart switch back into its normal position. The
console should reset itself and return to the Welcome
screen or banner.
To test the STOP button:
1. Start any workout on the treadmill.
2. Press the STOP button once. The console should show
that the workout is paused.
3. Press the STOP button again. The console should show a
workout summary.
4. Press the STOP button a third time. The console should
return to the Welcome screen or banner.
To test the Auto Stop feature:
1. Start any workout on the treadmill, but do not step onto
the running belt.
2. Wait two minutes without stepping onto the running belt.
At this point or shortly beforehand, the treadmill should
slow to a stop and the console should ask the user to
confirm that he or she is still present. If there is no
confirmation, the console should return to the Welcome
screen or banner.
