604338
5
Zoom out
Zoom in
Previous page
1/22
Next page
S3.25 Leg Press Option Assembly Instructions
page 5
2
Preparations
Preparations
CAUTION: To set up this equipment, you will need
assistance. Do not attempt assembly by yourself.
You must review and follow the instructions in this
guide. If you do not assemble and use the Leg Press
Option according to the following guidelines, you could
void the Precor limited warranty.
Required Tools
You need to obtain these tools before assembling
the unit:
¾-inch socket wrench
¾-inch box-end wrench
⁹⁄₁₆-inch socket wrench
⁹⁄₁₆-inch box-end wrench
Two adjustable pliers or crescent wrenches
Standard set of metric Allen wrenches
Utility knife or scissors
Measuring tape
Installation Requirements
Follow these installation requirements when
assembling the unit:
Fill out and mail the limited warranty card.
The warranty card is found on the back cover of
this guide.
Set up the Leg Press Option on a solid, flat
surface. A smooth, flat surface under the unit helps
keep it level. A level unit has fewer malfunctions.
Provide ample space around the machine.
Open space around the machine allows for easier
access.
Insert all bolts in the same direction. For
aesthetic purposes, insert all the bolts in the same
direction unless specified (in text or illustrations) to
do otherwise.
Leave room for adjustments. Tighten fasteners
such as bolts, nuts, and screws, so that the unit is
stable, but leave room for adjustments. Do not fully
tighten fasteners until instructed in the assembly
steps to do so.
Assembly Tips
A 6-inch scale is provided at the bottom of every
assembly instruction page. Use this scale to identify
the correct size bolts and spacers. The head of a
bolt is not used in measuring the length of a bolt.
To find out the length of a particular bolt, measure its
shank (the long, narrow part beneath the head).
Refer to the following diagram.
Read all caution notes on each page before
completing that step.
Some pieces have extra holes that you will not use.
Use only those holes indicated in the instructions
and illustrations.
While you may be able to assemble the Leg Press
Option by using the illustrations only, refer to the
text for important safety cautions and notes.
Bolt head
Bolt threads
Shank
To determine the
length of a bolt,
measure its shank.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor S3.25 Leg Press at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor S3.25 Leg Press in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info