604335

Precor S3.19 Leg Press Option Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
S3.15 Leg Press Option Assembly Instructions
page 7
1 2 3 4 5 6
Step 1. Attach the Leg Press to the Main Unit
1. Attach the Leg Press to
the Main Unit
Important: Most fasteners are fitted to the frame or
pulleys, you may need to disassemble the fasteners
before proceeding with each step.
A. Attach the Leg Press Base to the Rear Crossbar
using
three 1¼-inch hex head bolts
three flat washers
three spring washers
three locknuts
B. Position the Crossbrace against the Main Base
and place it on top of the Leg Press flange. Attach
the Crossbrace to the Leg Press using
two 2¹⁄₄-inch hex head bolts
two flat washers
Note: If the Multi-Hip is already attached to the
S3.15 then, skip step C. You will need to remove
two washers and locknuts to attach the Leg Press.
Then, replace the washers and locknuts onto the
two existing 4¹⁄₄-inch hex head bolts.
C. Attach the Crossbrace to the Main Base using
two 4¹⁄₄-inch hex head bolts
four radius washers
two locknuts
D. Wrench tighten all fasteners.
Note: If you plan to install the S3.15 Multi-Hip
Option immediately after you complete the Leg
Press Option assembly, place the two washers and
locknuts on the fastener ends finger tight so they
provide stability, but can easily be removed.
B
A
3 - 1¼" bolts
3 - flat washers
3 - spring washers
3 - locknuts
2 - 4¹⁄₄" bolts
4 - radius washers
2 - locknuts
C
2 - 2¹⁄₄" bolts
2 - washers
Rear
Crossbar
Leg Press
Crossbrace
Leg Press flange
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor S3.19 Leg Press Option at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor S3.19 Leg Press Option in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info