Manual Precor S3.15 Leg Press Option (page 5 of 16) (English)

604334

Zoom out

Zoom in

1/16

S3.15/S3.19 Leg Press Option Assembly Instructions

page 5

Preparations

You must review and follow the instructions in this

guide. If you do not assemble and use the Leg Press

Option according to the following guidelines, you could

void the Precor Limited Warranty.

Required Tools

Tools that you need to obtain before assembling the

unit include:

❏ ⁹⁄₁₆-inch socket

❏ ³⁄₄-inch socket

❏ ⁹⁄₁₆-inch box-end wrench

❏ ³⁄₄-inch box-end wrench

❏ Crescent wrench

❏ Wire tie cutter (cuts plastic tie wraps)

❏ Utility knife

Installation Requirements

Follow these installation requirements when

assembling the unit:

• Fill out and mail the warranty registration card.

• Set up the Leg Press Option on a solid, flat

surface. A smooth, flat surface under the unit

helps keep it level.

• Provide ample space around the machine.

Open space around the machine allows for easier

access.

• Insert all fasteners in the same direction. For

aesthetic purposes, insert all the fasteners in the

same direction unless specified (in text or

illustrations) to do otherwise.

• Leave room for adjustments. Tighten fasteners

(such as screws, nuts, and bolts), so the unit is

stable, but leaves room for adjustments. Do not

fully tighten fasteners until instructed (in the steps)

to do so.

Assembly Tips

• Fasteners may become loose and fall off during

shipment. Inspect the plastic wrap and packaging

for loose parts. To alleviate confusion during

assembly, reattach the loose fasteners and pulleys

found in the packaging.

• A black 6-inch scale with white numbers is

provided at the bottom of every assembly

instruction page. Use this scale to identify the

correct fastener size. The head of a fastener is not

used in measuring the length.

• Most fasteners are ³⁄₈-inch unless otherwise noted.

To find out the length of a particular fastener,

measure its shank (the long, narrow part beneath

the head). Refer to the following diagram:

• Zinc fasteners are used with the titanium parts.

Black fasteners are used when assembling the

stone gray painted surfaces.

• Most fasteners are fitted to the frame or pulley, you

will need to disassemble the fasteners before

proceeding with each step. Some pieces have

extra holes that you will not use. Use only those

holes indicated in the instructions and illustrations.

• Read all caution notes on each page before

completing that step.

• While you may be able to assemble the Leg Press

Option by reading the illustrations only, refer to the

text for important safety cautions and notes. The

S3.15 is shown throughtout the assembly

instructions. If you purchased the S31.9, the Leg

Press Option assembly is identical.

Fastener head

Fastener threads

Shank

To determine the

length of a fastener,

measure its shank.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Precor S3.15 Leg Press Option in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Precor S3.15 Leg Press Option Manual

Product: