604331
6
Zoom out
Zoom in
Previous page
1/16
Next page
Home Bench Assembly Instructions
page 6
2
Preparations
Preparations
You must review and follow the instructions in this
guide. If you do not assemble and use the Home
Bench according to the following guidelines, you could
void the Precor Limited Warranty.
Required Tools
Tools that you need to obtain before assembling the
unit include:
Two ⁹⁄₁₆-inch wrenches
Two ¾-inch wrenches
One ¹⁄₂-inch wrench
Wire tie cutter (cuts plastic tie wraps)
Note: Use box-end, open-end or standard crescent
wrenches.
Installation Requirements
Follow these installation requirements when
assembling the unit:
Fill out and mail the warranty registration card.
Set up the Home Bench on a solid, flat surface.
A smooth, flat surface under the unit helps keep
it level.
Provide ample space around the machine.
Open space around the machine allows for
easier access.
Insert all fasteners in the same direction. For
aesthetic purposes, insert all the fasteners in the
same direction unless specified (in text or
illustrations) to do otherwise.
Leave room for adjustments. Tighten fasteners
(such as screws, nuts, and bolts), so the unit is
stable, but leaves room for adjustments. Do not
fully tighten fasteners until instructed (in the steps)
to do so.
Assembly Tips
A black 6-inch scale with white numbers is
provided at the bottom of every assembly
instruction page. Use this scale to identify the
correct fastener size. The head of a fastener is
not used in measuring the length.
To find out the length of a particular fastener,
measure its shank (the long, narrow part beneath
the head). Refer to the following diagram:
Silver fasteners are used within the silver painted
areas. Black fasteners are used when assembling
the gray painted surfaces.
Some pieces have extra holes that you will not use.
Use only those holes indicated in the instructions
and illustrations.
Read all caution notes on each page before
completing that step.
While you may be able to assemble the Home
Bench by reading the illustrations only, refer to the
text for important safety cautions and notes.
Fastener head
Fastener threads
Shank
To determine the
length of a fastener,
measure its shank.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor Home Bench at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor Home Bench in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info