604356
96
Zoom out
Zoom in
Previous page
1/101
Next page
EFX546i Elliptical Fitness Crosstrainer Assembly Guide 6
Remove the four screws from the back console plate using a Phillips-
head screwdriver. Set the back console plate and screws aside.
Important: Attach one handrail at a time.
Insert a handrail into the handrail clamp. As you do so, ask your
assistant to thread the cable through the handrail clamp and out the
exit hole.
Important: Do not stretch, crimp, or damage the cable. Cables
damaged by improper installation will not be covered by the Precor
Limited Warranty.
Use one hand to apply pressure on the handrail portion being
inserted into the clamp as you lift and lower the base of the handrail
with the other hand. This rotating motion helps move the handrail into
the clamp.
Connect the handrail cable to the heart rate display cable. Before
making the connection, feed the cable behind the handrail. Refer to
the illustration. If the cable does not follow this route, it can become
crimped or damaged when you replace the back console plate.
Secure the handrail to the lower handrail mount. Attach the inner
handrail cap (J) onto the lower handrail, and then thread one large
bolt (removed in step 2) through the handrail and handrail mount.
Finger tighten.
Important: Repeat steps 11, 12, and 13 for the opposite handrail.
Before you wrench tighten the fasteners, look in the upper handrail
clamp exit hole. A ¼-inch to ½-inch gap (6mm to 12mm) needs to
be retained between the ends of the handrails. Adjust the handrails
before continuing with the next steps.
Wrench tighten the two handrail bolts using the 1⁵⁄₁₆-inch box-end
wrench (K).
Tighten the two handrail clamp fasteners using a hex key, and
reattach the back console plate using the four screws removed in
step 10.
Rear
view of
console
Heart rate
display cables
Handrail cables
Handrail clamp
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor EFX546i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor EFX546i in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info