604306
81
Zoom out
Zoom in
Previous page
1/91
Next page
EFX 400 Series Assembly Guide 20
Changing the EFX 447 from Moving Arms to
Fixed Arms
The EFX 447 is assembled with movable arms; however, this model includes an
option that allows you to convert the movable arms to fixed arms.
To convert to fixed arms:
1. Disconnect the socket end of the lower link arm from the pedal frame by
pressing the pin on the socket end and pulling it outward.
Figure 42: Location of pin on socket end of lower link arm
2. Twist the socket end toward the floor and insert the pin into the quick pin
release socket on the base frame in front of the back cover.
Figure 43: Changing socket end position
3. Repeat the previous two steps for the pedal on the opposite side of the EFX.
Figure 44: Position of socket end in base frame
4. To convert the EFX back to moving arms, perform this procedure in reverse
order.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor EFX 423 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor EFX 423 in the language / languages: English as an attachment in your email.

The manual is 9,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info