604306
67
Zoom out
Zoom in
Previous page
1/91
Next page
EFX 400 Series Assembly Guide 6
Beginning Assembly
Remove the packaging around the lift covers.
To remove the lift cover:
1. Grasp the magazine rack at its base and slide it up and off the front lift cover.
Set the magazine rack aside.
Note: You may have to apply strong pressure to remove the magazine rack.
Figure 2: Magazine rack removal
2. Using the ⁵₃₂-inch hex key, remove the four fasteners that secure the front lift
cover and set them aside.
Figure 3: Removing the lift cover fasteners
3. A tab on each side of the front lift cover holds the front and back covers
together. Gently squeeze the sides of the back covers to release the tabs and
remove the front lift cover.
Important: The lift screw (shaded in figure below) is lubricated before shipping.
Grease on the lift screw is required for proper operation, but can stain clothing. Be
careful not to get grease on your clothing as you remove the lift cover.
Figure 4: Tab locations
To attach the lift assembly to the equipment frame:
1. Tear a slit in the foam pouch. Ask your assistant to lift and hold the ramp
while you position the lift motor assembly and slide the yoke into the ramp.
Note: The foam pouch has been placed over the end of the ramp to prevent
scratches to the cover. It will be removed in a later assembly step.
Figure 5: Slide yoke into ramp
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor EFX 423 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor EFX 423 in the language / languages: English as an attachment in your email.

The manual is 9,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info