Manual Precor DPL0616 (page 13 of 36) (English)

605094

Zoom out

Zoom in

1/36

Discovery Series Plate Loaded Line Owner’s Manual: Monthly Inspection 11

This section covers the tasks you should perform each month to maintain the

equipment. Perform the following tasks as appropriate for the unit you are

maintaining:

 Inspect frames and movement arms.

 Check and lubricate ratcheting seat lever.

 Inspect all fasteners.

Inspect Frames and Movement Arms

Inspect frames and movement arms monthly for proper function and integrity.

Check for cracks, chipped paint, or rust. Touch up dings and chips in the paint

as needed. Replace any component at first signs of wear.

Note: You can order touch-up paint from Precor by calling Customer Support.

Refer to Obtaining Service.

Inspect frames for cracks, particularly at the joints. If any cracks are found,

take the equipment out of service immediately and have a qualified

maintenance technician repair it. Refer to and Obtaining Service.

To remove surface rust from the frame, rub lightly with a fine wet/dry

sandpaper or fine steel wool. Finish with Precor touch-up paint if needed.

Maintain paint luster with an application of a mild automotive wax product.

To maintain the powder coated, plated, and chrome parts, use a mild

detergent-based cleaner for light dirt and grime removal. For removing heavier

dirt and grease and for polishing, use a good automotive polish. For scuffs and

marks that are not removed by the above methods, use a fine-grit cleanser. Do

not use solvents, lacquer thinner, acetone, or fingernail polish remover.

Inspect All Fasteners

Fasteners can loosen with normal use. Inspect all nuts, bolts, screws, and other

fasteners to make sure they are tight and installed correctly.

Be sure to check fasteners at bolted joints to make sure the connections are

secure. If a fastener is loose but in good condition, retighten it. If you are

concerned about the integrity of the fastener, remove it, clean the threads, and

inspect it for any damage such as cracks, bad threads, corrosion, or rust.

Reinstall the fastener if it appears to be in good condition. Otherwise, remove

the equipment from service until a new fastener can be installed properly. You

can order new fasteners from Customer Support. For additional information,

refer to Obtaining Service.

Important: Fastener quality and specifications vary considerably. Replace only with

the Precor approved fastener specifically engineered for the precise application.

Failure to do so will void the Precor Limited Warranty.

Monthly Inspection

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Precor DPL0616 in the language / languages: English as an attachment in your email.

The manual is 4,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Precor DPL0616 Manual

Product: