605092
29
Zoom out
Zoom in
Previous page
1/40
Next page
Biceps Curl Assembly Guide: Assembling the Equipment 11
Installing the Movement Arm
For this procedure, you will need the two flat, oval, metal keys from the
hardware kit. These keys lock the movement arm to the axle and cam.
To install the movement arm:
1. Insert the two keys into the two recesses on the axle. If necessary, tap the
keys lightly with a rubber mallet to seat them in the recesses.
2. Slide the movement arm over the axle as shown in the following figure,
making sure that the notch on the movement arm lines up with the two
keys.
Figure 8: Movement arm installation
3. Place an end cap over the end of the axle and secure it using an M12 x 30
mm flat head cap screw.
Attaching the Counterweight
After completing assembly of the movement arm, you can make final
adjustments to the alignment of the frame and tighten its fasteners.
To attach the counterweight:
1. Slide the narrow end of the counterweight into the upper end of the
movement arm as shown in the following figure.
Figure 9: Counterweight installation
2. Secure the counterweight using two M8 x 25mm flat head cap screws.
Tighten the screws completely.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor DPL0520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor DPL0520 in the language / languages: English as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info