Manual Precor CW 813 (page 32 of 44) (English)

605089

Zoom out

Zoom in

1/44

General Safety and Maintenance Manual: Weekly Inspection 18

Inspect Cable Handle Attachments

Check the cable-to-handle attachment area very closely. Refer to

Figure 8. Look for frayed cable ends, broken thimbles, bent cables,

worn spring clips, worn handles, and any other unusual wear.

Figure 8: Check connections to handles carefully

Also, check the spring clip gate and make sure it closes properly and

engages securely. Refer to Figure 9. Check the spring clip, links, and

cable to ensure integrity; replace any spring clip link that does not

function properly or shows wear.

Figure 9: Check spring clip gate to ensure proper closure

Inspect Pulleys

Precor uses precision ball bearing idler pulleys to smoothly guide

the cable.

Inspect each pulley for damage, including hairline cracks, chips, or

missing sections. Worn surfaces in the pulleys can cause severe

damage to the cables and must be replaced at the first sign of wear or

damage.

Be certain that the wheels turn freely as the equipment is used.

Inspect each pulley for excessive side-to-side play, which indicates

worn bearings or loose mounting bolts. If excessive play is discovered,

remove the pulley to inspect the bearings, and replace the entire

pulley if necessary.

Inspect Weight Stack and Selector Pin

Weight stacks are made of precision machine plates that are

designed as a single mechanism to stack precisely. Use only Precor-

supplied add-on weights and weight selector pins.

On a weekly basis, inspect weight stacks and selector pins. Wipe

each plate with a damp cloth as needed. Inspect all plates for sharp

burs or damage. Wipe dirt and dust off the guide rods.

Make sure the equipment uses only the original Precor selector pin. In

addition, make sure the selector pin can be fully inserted and retained

in each weight plate.

Check these

areas closely.

Spring clip gate

properly closed

Spring clip gate not

properly closed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Precor CW 813 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Precor CW 813 Manual

Product: