691234
14
Zoom out
Zoom in
Previous page
1/60
Next page
page 14
COMMERCIAL PRODUCTS DIVISION
9. Secure the display console to the upright supports. Diagram 7.
a. Make sure that the cable is routed through the top of the upright support.
Have an assistant hold onto the cable (see inset).
Diagram 7
Install the
display console.
Display console
Display console
mounting
brackets
Upright
support
Diagram 8
Secure the
display console.
Tighten the
screws, but
leave room for
adjustments.
1-inch screws (G)
with washers (D)
Display console
1
3
2
CSAFE
receptacle
Cable receptacle
b. Align the display console with the upright support mounts. Insert two 1-inch
screws (G) with washers (D) and finger tighten. Do the same for the oppo-
site upright support. Do not fully tighten the screws. Refer to Diagram 8, #1.
c. Attach the cable connector by sliding it into its receptacle underneath the con-
sole. A definite “click” is heard when the cable is properly attached. Refer to Dia-
gram 8, #2. If you do not hear and feel the connector “snap” into place, reinsert it.
Important: Do not use the receptacle covered by the plastic plug. This
CSAFE receptacle is for a separate option.
d. So that the cable does not hang below the console, slide it into the clip
found underneath the console. Refer to Diagram 8, #3.
8. Attach the
left side
upright support to the base assembly. Refer to
Diagram 6. Align the upright support with the base assembly mounting
bracket and secure it by following steps 7a and 7b.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor C934 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor C934 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info