603383
77
Zoom out
Zoom in
Previous page
1/149
Next page
P80 Console Wiring Quick Start Guide
P80 Wiring Quick Start Guide
P/N 301419-241 rev D, en
September 2014
© 2014 Precor Incorporated
Equipment Verification Steps
Use the following checklist to set up and configure the P80 console.
For more information, refer to Operating and Maintaining the P80
Console and Setting Up and Using Preva Business Suite.
Install console based on installation guide and this sheet.
Remove serial number label from P80 mounting plate.
o
Verify that the patch cables from the floor or wall cannot
become caught on the equipment’s moving components.
o
Verify operation of machine controls.
• Elevation and speed
• Resistance
o
Update software as necessary.
o
Scan TV channels.
1. Verify that available channels match channel list.
2. Rename channels if necessary.
3. Set the default channel.
o
Touch GO, then verify that the following items work:
• Channel up/down controls
• Volume up/down controls
• Channel changes on the channel list
• Personal media player connection (video and audio)
• Headphone jack
• Treadmill STOP button and emergency stop lanyard
o
Register the equipment. You will need the following items:
• Site code
• Precor technician account name and password
• Serial number from the base
• Friendly name assigned to the equipment by the facility
To complete registration:
1. Verify IP connectivity.
2. Enter the Preva server name (na.preva.com for North
American sites).
3. Enter your assigned Precor technician account name and
password.
4. Follow the on screen instructions to register the product.
o
Ask the facility’s Preva administrator to log on to Preva
Business Suite and confirm that all P80-based equipment
appears there.
o
Precor Incorporated
20031 142nd Ave NE, P.O. Box 7202, Woodinville, WA 98072-4002
1-800-347-4404 • www.precor.com
Connecting the heart rate
sensor cable
Connecting the TV cable
Connecting the Ethernet (3) and base unit data (4) cables
Connecting the safety key
cable (treadmills only)
Cable Connector Type Circuit Connector Location
Safety key (treadmills only) Six-contact strip, keyed
TV in F-type coaxial
Ethernet (LAN) Eight-contact modular, on round black cable
Data from base unit Eight-contact modular, on flat gray cable
Power Two-contact plug, polarized and latched
Heart rate sensors Four-contact strip, keyed
CSAFE Eight-contact modular, on flat gray cable
WARNING
Before you connect any cables to the console, make sure that the equipment is not
connected to any external power source.
Connecting the power cable
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor AMT 885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor AMT 885 in the language / languages: English as an attachment in your email.

The manual is 10,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Precor AMT 885

Precor AMT 885 User Manual - German - 136 pages

Precor AMT 885 User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info