604344
9
Zoom out
Zoom in
Previous page
1/16
Next page
Ab-X100 Assembly Guide
page 9
Assemble the Main Structure
1. Insert the End Caps (M) into the Front Support and
attach two plastic feet (L) to its base. Secure the
pieces using
two 1¼-inch buttonhead screws (G)
two split washers (E)
Wrench tighten.
2. Set the Main Frame in an upright position.
3. Cut the wire tie holding the Support Bar to the
wheeled Base Support and remove any packing
material.
4. Attach the Base Support to the Main Frame. Ask
your assistant to lift the Main Base while you align
the mounting holes and insert
four 1-inch buttonhead screws (A)
four split washers (B)
four flat washers (C)
Wrench tighten.
Note: Make sure the wheels are positioned as
shown in the illustration. The wheels must be
outside of the Main Frame not under it.
5. Loosen the four screws that secure the mounting
bracket so you can install the Handlebar Assembly.
Assemble the Main Structure
Main Frame
Base Support
4 - 1" buttonhead screws
4 - split washers
4 - washers
Main Frame
Front Support
2 - 1¼" buttonhead screws
2 - split washers
End Cap
Loosen the four bracket
screws two full turns.
Support Bar
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Precor Ab-X100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Precor Ab-X100 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info